Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B3G10 SI BK20560 - PA6-GF50 - BASF

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 模塑测量的特殊性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Glass fibre-reinforced injection moulding grade, with excellent surface quality especially suitable for the production of visible parts with very high stiffness. Optimum surface quality is generally obtained at a very high injection speed.

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	12 / *	cm³/10min	ISO 1133
温度	275 / *	°C	-
载荷	5 / *	kg	-

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	16500 / 10800	MPa	ISO 527
断裂应力	235 / 160	MPa	ISO 527
断裂伸长率	3 / 5	%	ISO 527
无缺口简支梁冲击强度, +23°C	95 / 100	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	85 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	20 / 25	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	16 / -	kJ/m²	ISO 179/1eA

热性能	干 / 已调节	单位	Test Standard
ISO数据
热变形温度, 1.80 MPa	200 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	215 / *	°C	ISO 75-1/-2

其它性能	干 / 已调节	单位	Test Standard
密度	1570 / -	kg/m³	ISO 1183

模塑测量的特殊性能	干 / 已调节	单位	Test Standard
ISO数据
粘数	135 / *	cm³/g	ISO 307, 1157, 1628

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	80	°C	-
预干燥-时间	4	h	-
加工湿度	≤0.15	%	-
注塑熔体温度	280 - 300	°C	-
模具温度	80 - 110	°C	-

函数

典型数据

加工方法

注塑

供货形式

粒料, 黑色

添加剂

脱模助剂

地区供应

欧洲

其他信息

注塑成型

PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 280 - 300 °C
injection molding, Melt temperature, recommended: 290 °C
injection molding, Mold temperature, range: 80 - 110 °C
injection molding, Mold temperature, recommended: 100 °C
injection molding, Dwell time, thermoplastics: 10 min

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.